| Center height |
600 mm |
| Swing over bed |
1190 mm (47”) |
| Swing over cross slide |
830 mm |
| Swing over gap |
1750 mm |
| Width of gap |
600 mm |
| (No gap if Distance between centers ≥ 5m) |
| Width of bed |
800mm (32”) (1000mm with auxiliary guideway) |
| Distance between centers |
2000~15000 mm (80~600”) In one piece |
| Spindle bore |
Ø535mm (21”) |
| Spindle nose |
A2-28 |
| Spindle speeds (12 Steps) |
3-230 rpm |
| Tailstock quill diameter |
Ø200 mm (Std.) or Ø290 mm Rotary Quill (Opt.) |
| Taper of center |
MT#7 |
| Quill travel |
300 mm |
| Cross feeds |
0.065-0.96 (48 Kinds) |
| Cross travel |
780 mm |
| Compound rest travel |
350 mm |
| Tool size |
50 x 50 mm |
| Longitudinal feeds |
0.13-1.92 (48 Kinds) |
| Lead screw diameter |
Ø50mm |
| Lead screw pitch |
2TPI (inch) or 12mm (metric) |
| Threading range, metric |
2-30 mm/Pitch (48 Kinds) |
| Threading range, inch |
1-15 TPI (48 Kinds) |
| Module pitch threads |
1-15M (32 Kinds) |
| DP. pitch threads |
2-30P (48 Kinds) |
| Main spindle motor |
30 HP (Std.), 40HP (Opt.) or 50HP (Opt.) |
| Rapid motor |
1 HP |
| Coolant pump |
1/4 HP |
| Oil pump |
12W |
